Go to shopping cart

Step-by-step guide to install the iCamera KEEP

Getting Started

If this is your first iSmartAlarm product,

  1. Connect your smartphone to a 2.4 GHz Wi-Fi network.
  2. Download the iSmartAlarm App from the Apple App Store or Google Play.
  3. Create an iSmartAlarm account
  4. Once registered, select Create
  5. Follow the instructions in the app to finish setting up your iCamera KEEP.

If you already have an iSmartAlarm account,

  1. Connect your smartphone to a 2.4 GHz Wi-Fi network.
  2. Login to your iSmartAlarm account.
  3. Tap Devices, then tap the + icon
  4. Select the iCamera KEEP
  5. Follow the instructions in the app to finish setting up your iCamera KEEP.

Adding Family Members

In order for a person to view the camera's live video and video recordings, they must be a member of the Home that the camera is in.

To add them to your Home,

  1. Have the person download the iSmartAlarm app and create an account.
  2. When asked if they would like to Join or Create a home, select Join. The app will then ask them to scan a QR code.
  3. On your phone, open the drawer, tap Members, then tap + in the top right corner.
  4. Scan the QR code with their phone.
  5. They are now a member of your Home.

If the person has already created an account,

  1. Open the drawer by swiping from the left edge of the screen
  2. Tap the down arrow button > Add New Home > select Join
  3. On your phone, open the drawer, tap Members, then tap + in the top right corner.
  4. Scan the QR code with their phone.
  5. They are now a member of your Home.

Mounting the iCamera KEEP on a Wall

The iCamera KEEP comes with an aluminum mounting bracket that you can mount just about anywhere.

To get started,

  1. Place the mounting bracket against the wall. Mark screw hole positions and drill two holes into the wall at these locations. Leave at least 4½ ” on top and 1¼ ”of open space on each side to allow the iCamera KEEP to move freely.

  1. For stone, brick and drywall, insert a wall anchor (included) into each hole. Do not use wall anchors if wall is not stone, brick, or drywall. Screw the longer screw into the existing holes or wall anchors. Leave each screw exposed ¼”out from the wall.

  1. Ensure the power cable is plugged in and exits through the base’s opening space. Use three short screws to secure the iCamera KEEP to the bracket.

  1. Place the bracket onto the two screws previously installed in wall.

  1. And you’re done!
Still need help? Submit a request
Powered by Zendesk